The Heavy Duty Single Axle Utility Garden
Trailer That's Economical & Versatile
Model 5400 $699.00 Add To Cart
Model 5400LW (Less Wood) $659.00 Add To Cart

Sale Special! Model 5400- $529.00 + Shipping! Call us for a shipping quote!

Model 5400LW-$489.00 + Shipping

Call Toll Free: 1-800-335-1880

• 5 ft bed length
• Approximate weight 150 lbs.
• Capacity - approximately 1200 lbs.
• Standard model includes 5 ft. by 38 inch wide bed with 12 inch high removable side racks.
• Model 5400 LW (less wood) is also available at a further savings.
• Unique corner braces are included on all four corners to allow individual side board removal or complete conversion to a flatbed trailer.
• Spring loaded positive lock allows single action flip up dumping for quick emptying.
• 16 x 6.5-8 high flotation tires (16 inch O.D.).
• 2 x 2 inch square tubing tongue material and heavy plate steel axle support.
• Treated Lumber

 1 Ton Versatility Utility Wagon

Wagon Specifications • 16 x 6.5-8 high flotation tires (16 inch OD.)
• 8 inch steel wheels with 3/4 inch sintered steel bearings equipped with grease fittings for long life.
• 3/4 inch high strength axles.
• 3 inch steel cross beams for bed and axle support.
• Heavy structural steel angle front to rear connector.
• 2 inch channel iron tongue for rugged use.
• 1 1/2 x 1/4 inch steering tie rods give maximum stability.
• Approximate weight: 220 lbs.
• Models 6300LW and 7300LW (less wood) are also available
• All beds are of heavy angle iron construction in combination with treated lumber. Removal of all side racks allow easy conversion to a flat bed. Bed width is 38 inches.

Heavy duty 4-wheel design allows large load handling with ease. Pull it with your lawn or garden tractor. The one ton capacity makes this wagon versatile! It fits in your barn aisle and is handy around the yard and garden. Haul wood, hay, grain, gravel, sand, manure, mulch, garden products, leaves, yard clean up, etc. The 4 wheel design allows you to leave your load on the wagon while unhitched and to be pulled easily by hand when necessary.

Model 7300 (7 Ft. bed) $929.00 Add To Cart Sale Special- Model 7300- $649.00 + Shipping!

Model 7300LW (Less Wood) $889.00 Add To Cart Model 7300LW- $609.00 + Shipping!

Model 6300 (6 Ft. bed) $899.00 Add To Cart Model 6300- $609.00 + Shipping!

Model 6300LW (Less Wood) $859.00 Add To Cart Model 6300LW- $569.00 + Shipping!

Call Toll Free: 1-800-335-1880

 Optional: Hand Operated Bolt On Dump
Model 3010 $120.00 Add To Cart
• Converts standard wagon or trailer into dump bed for quick unloading (1/2 ton dump capacity).
• Variable position dump action allows material disbursement as desired depending upon angle of bed.
• Combination scissor and hydraulic jack arrangement provides bed raising for the hand operated model 3010.

Sale Special- Model 3010 $99.00 + Shipping! Call us for a shipping quote!

 Tandem Trailer, For Rugged Use!
A great accessory for small or large garden tractors where big loads are expected. The tandem axle design allows the maneuverability of a trailer plus the weight capability of a wagon. • Approximate weight 220 lbs.
• Standard 6 and 7 foot models have 38 inch wide beds and 12 inch high removable racks.
• Models 6500 LW and 7500 LW (less wood) are also available at a savings so that self installation of wood is possible.

Trailer Specifications: • 16 x 6.5-8 high flotation tires (16 inch O.D.)
• 8 inch steel wheels with 3/4 inch sintered steel bearings equipped with grease fittings.
• 3/4 inch high strength axles. 2 x 1 inch channel steel chassis.
• Floating tandem wheel for following rough terrain.
• Heavy 2 inch square material for tongue.

Model 7500 (7 Ft. bed) $929.00 Add To Cart Sale Special- Model 7500- $649.00 + Shipping!

Model 7500LW (Less Wood) $889.00 Add To Cart Model 7500LW- $609.00 + Shipping!

Model 6500 (6 Ft. bed) $899.00 Add To Cart Model 6500- $609.00 + Shipping!

Model 6500LW (Less Wood) $859.00 Add To Cart Model 6500LW- $569.00 + Shipping!

Call Toll Free: 1-800-335-1880

2-TON UTILITY WAGON & TANDEM AXLE TRAILER
(Not for Over highway Use)
Both Models • Big 4' x 8' bed (inside dimensions)
• Treated lumber used for both side racks & flooring.
• Slide in tail gate
• High flotation 20 x 10-8 tires with regreasable roller bearings (slow speed)
• Heavy angle iron and channel iron bed frame and chassis
• Accepts standard agriculture hydraulic 24" stroke cylinder (up to 4" bore)-Not included
• Drop pin hitches for draw bars.

OUR BIGGEST!
Model 8500 $1649.00 Add To Cart
Tandem Axle Trailer Approx. Wt. 500 lbs.

Sale Special- Model 8500- $1099.00 + Shipping! Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

The Tandem trailer (above) features floating axles for rough terrain • Excellent maneuverability while backing
• Approximately 15% hitch weight distribution
• Tongue jack is included

Perfect for the 20-35 HP Utility tractor. • The 4-Wheel Wagon (left) provides good load distribution
• Easy hook up with 0% hitch weight
• Leave it set while loaded

Model 8300 $1649.00 Add To Cart
4-Wheel Wagon Approx. Wt. 500 lbs.

Sale Special- Model 8300- $1099.00 + Shipping! Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

 *NOT FOR HIGHWAY USE!

Model CM166508TURF

16 x 6.50-8 Kenda Turf Rider 2 ply tire mounted on a steel wheel with 4 hole lug pattern. 4" pattern with 1/2" holes. Center hole measures 2 1/2". This is the wheel and tire assembly used on our model 600 manure spreader.

Model CM166508TURF $65.00 each Add To Cart

Free shipping to a residential or business address Call Toll Free: 1-800-335-1880

  *NOT FOR HIGHWAY USE!

Model CM166508RIB

16 x 6.50-8 Kenda Multi Rib 2 ply tire mounted on a steel wheel with 3/4" sintered metal sleeve bearings. 3" hub length with zerk grease fitting. This is the wheel and tire assembly used on our lawn and garden trailers, wagons and carts.

Model CM166508RIB $65.00 each Add To Cart

Free shipping to a residential or business address Call Toll Free: 1-800-335-1880

  *NOT FOR HIGHWAY USE!

Model CM201008TURF

20 x 10.00-8 Kenda Grass Hopper 4 ply tire mounted on a steel wheel with 1" roller bearings. 4" hub length with zerk fitting. This is the wheel and tire assembly used on our 2 ton wagons and trailers and our 5450ATV and 7550ATV Trailers.

Model CM201008TURF $99.00 each Add To Cart

Free shipping to a residential or business address Call Toll Free: 1-800-335-1880

*NOT FOR HIGHWAY USE!

Model CM34SA - For use with low-speed, off road wheel and bearings. NOT for over the highway use! 3/4" straight axle with 3 1/4" working length. 1" square tube 3" long welded on for attachment. Overall length 6 3/4" 9/64" cotter pin hole 3/4" SAE flat washer and 1/8 x 1 1/4" cotter pin included. For use with part no CM166508RIB wheel tire assembly. $15.00 each. Add To Cart

Model CM11SA - For use with low-speed, off road wheel and bearings. NOT for over the highway use! 1" straight axle with 4 1/4" working length. 1 1/4" square tube 4" long welded on for attachment. Overall length 9 1/4" 17/64" cotter pin hole 1" SAE flat washer and 1/4 x 1 1/2" cotter pin included. For use with part no cm201008turf wheel tire assembly. $18.00 each. Add To Cart