Horse Stalls and Horse Equipment

Toll Free: 1-800-335-1880 Office Hours Monday-Friday 7:00 am - 5:00 pm EST.

Please note the shipping description with each item. * No Minimum Order Requirement for items on this Page. Click here for your FREE CATALOG!

(Special Sale items NOT Included on free shipping offers)

 Home Page

 Horse Stalls

 Horse Waterers

 Horse Feeders

 Saddle Racks

 Bridle Racks

 Cross Ties

  Dutch Doors

 Door Guards

 Horse Stall Mats

 Bucket Holders

 Utility Doors

 Gravity Latch

 Rotary Conditioners

 Harrows

 Arena Rippers

 Manure Spreaders

 Dog Kennels

 Utility Wagons & Trailers

 Company Profile

 Warranty Information

 Shipping Information

 Horse Links

 ATV Equipment

 New! Land Plane Leveler

 Product Assembly Manuals

 Customer Photo Gallery

 National Barn Builders Directory

ATV Equipment & Accessories

 We manufacture a wide range of ATV equipment & accessories including manure spreaders, wagons, trailers and harrows. Put your ATV to work using our heavy duty accessories. Our wagons and trailers work great as vineyard trailers, hauling firewood, sand, gravel, all the chores you can't do with a light-duty trailer. Our ATV model trailers are designed for use behind RTV (rugged terrain vehicles) and UTVs for people wanting the maximum use your vehicle is capable of.

NEW PRODUCTS!!!

 

 

Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

 New! Model 7340ATV Tuff-Wagon

ATV owners have been asking for a dump wagon for hauling bulky items like firewood, leaves, branches and yard waste. This ATV wagon is designed exactly for those needs! (Add our 3010 Hydraulic Dump shown below for making dumping easier).

ATV Wagon Specifications • High flotation 20 x 10-8 tires
• 1 inch roller bearings equipped with grease fittings for long life.
• 1 inch high strength axles.
• Steel cross beams for bed and axle support.
• Heavy structural steel angle front to rear connector.
• 2 inch channel iron tongue for rugged use.
• 1 1/2 x 1/4 inch steering tie rods give maximum stability.
• Approximate weight: 290 lbs. 2000 lb capacity!
• Model 7340ATVLW (less wood) also available
• All beds are of heavy angle iron construction in combination with treated lumber. Removal of all side racks allow easy conversion to a flat bed with stake pockets welded on the bed frame for adding higher side racks if needed. Bed size 4ft x 7ft! Bottom of bed to the ground measurement 2 ft.

Heavy duty 4-wheel design allows large load handling with ease. Pull it with your ATV, lawn or garden tractor. The one ton capacity makes this wagon versatile! Haul wood, hay, grain, manure, mulch, garden products, leaves, yard clean up, etc. The 4 wheel design allows you to leave your load on the wagon while unhitched and to be pulled easily by hand when necessary.

Model 7340ATV (7 Ft. bed) $1299.00 Add To Cart Sale Specials - Model 7340ATV- $899.00 + Shipping!

Model 7340ATVLW (Less Wood) $1259.00 Add To Cart Sale Special - Model 7340ATVLW- $859.00 + Shipping!

$39.00 Optional 2" ball hitch adapter click here

 

 New! Model 7340ATVRG Tuff-Wagon Running Gear

For the Do-It-Yourself kind of person, we offer the Model 7340ATV Wagon as a running gear only option. Just add the type of bed you need and go! Measures 5 ft center axle to center axle and is 46 inches wide.

Model 7340ATVRG Running Gear $1199.00 Add To Cart Sale Specials - Model 7340ATVRG Running Gear $749.00 + Shipping!

 

 NEW!!!!! Fully adjustable tongue and hitch! Our new design allows for the tongue length to be adjusted from 28" in length to 38" from the front of the cargo box! Our new adjustable hitch allows for 8" of height adjustment! Great for clearing the baskets and racks on the back of your ATV. Currently available only on our Model 7550ATV & 5450ATV trailers.

 

 Watch a Video of the Model 7550ATV Trailer with the Optional 3010 Hydraulic in Use on Youtube.

  Super Heavy Duty ATV Tandem Trailer, For Rugged Use! 2500 lb. Capacity!
The ultimate in an ATV trailer!. This tandem axle design allows the maneuverability of a trailer plus the weight capability of a wagon. • Approximate weight 250 lbs.

Model 7550ATV (7 Ft. bed) $1299.00 Add To Cart


Sale Special- $859.00 + Shipping! Call us for a shipping quote!

Call Toll Free: 1-800-335-1880


• Standard 7 foot model has 38 inch wide beds and 12 inch high removable racks.

Trailer Specifications: • Big 20" high floatation, high capacity ATV tires.
• Roller bearings equipped with external grease fittings. Rated for 20 mph!
• Full 1 inch high strength axles. 2 x 1 inch channel steel chassis.
• Floating tandem wheel for following rough terrain.
• Heavy 2 inch square material for tongue. Suggested hitch height of 10-18" with axle clearance of 10".

46" outside to outside wheel stance provides for superior stablity!

Add our 3010 hand-operated hydraulic dump (shown below) for ease of use and added versatility!

 

NEW!!!!! Fully adjustable tongue and hitch! Our new design allows for the tongue length to be adjusted from 28" in length to 38" from the front of the cargo box! Our new adjustable hitch allows for 8" of height adjustment! Great for clearing the baskets and racks on the back of your ATV. Currently available only on our Model 5450ATV & 7550ATV trailers.

   Heavy Duty Single Axle ATV Trailer
Model 5450ATV $899.00 Add To Cart

Sale Special- $639.00 + Shipping! Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

• 5 ft bed length
• Approximate weight 200 lbs.
• Capacity - approximately 1600 lbs!
• Standard model includes 5 ft. by 38 inch wide bed with 12 inch high removable side racks.
• Unique corner braces are included on all four corners to allow individual side board removal or complete conversion to a flatbed trailer in minutes!
• Spring loaded positive lock allows single action flip up dumping for quick emptying.
• 20" high flotation, high capacity ATV tires with regreaseable roller bearings. 20 mph rated speed.
• 2 x 2 inch square tubing tongue material and heavy plate steel axle support with 1" axles. 10"-18" suggested hitch height with 10" axle clearance.
• Treated Lumber bed and side boards for long life.

46" outside to outside wheel stance provides for superior stablity!

 

12.5 Cubic Ft. Poly-Bed Dump Cart for ATVs & Garden Tractors

Model ospoly12ft $449.00 Add To Cart

• 12.5 cu. ft. heaped capacity
• 1000 lb. load capacity
• Structural foam injected poly cart body will not rust
• Spring loaded dump release lever
• Stake pockets
• Tie down bars
• Slots for load dividers
• 2x4 cross member slots
• Ledge for adding shelf
• Holes on top for future attachments
• Steel parts are powder-coated for long life
• Heavy-duty 11 gauge steel undercarriage
and drawbar
• 18 x 9.50 x 8 ATV wheels w/roller bearings (rated for 20 mph)
• 1” axle
• Sloped back for easy dumping
• 1 7/8" ball hitch adapter included!
• Shipping Weight: 125 lbs.

Flat Rate $99.00 shipping to a business address only

Call Toll Free: 1-800-335-1880

 

 ATV Flatbed- Tilt Trailer 1000 lb. Capacity!

This trailer is built to take the punishment behind of an ATV! 34" W x 48" L expanded metal trailer deck, 18 x 9.50 x 8 ATV wheels with roller bearings for long life, 14 gauge steel tube frame with side pockets for adding your own side racks. Tilt bed locks down for secure hauling. Powder-coated black with 2 safety reflectors on the back.

$399.00 Add To Cart

Flat Rate $99.00 shipping to a business address only

Harrows

 

  Model AF-5 Harrow for ATV and Garden Tractors.

The Adjusta-Flex Harrow is a new and innovative adjustable and flexible harrow. This design allows you to adjust width, length and aggressiveness. Pictured here at maximum width, the Adjusta-Flex Harrow is great for smoothing rough arenas, breaking up manure, dethaching pastures and general grounds maintenance.
• Adjustable width
• Adjustable Length
• Full 1/2" Tines
• Aggressiveness changes with width
• Model AF-5 adjustable 3 1/2' to 5' width and 5' long.

$405.00 Add To Cart

This item can ship to your residence FREE!

harrow carrier

 Model AF-5C Optional Wheel Carrier
When in the aggressiveness mode (shown left with optional wheel carrier) the Adjusta-Flex is the only harrow with tines angled forward. This makes it perfect for really digging in and breaking up hard ground. The optional wheel carrier makes transportation simple as you leave the carrier attached to your hitch and simply lower your harrow sections to the ground. No more tearing up grass as you move from area to area! The harrow stores easily on the carrier holders.

Optional wheel carrier for AF-5 only:

$210.00 Add To Cart

This item can ship to your residence FREE!

 

 Flex-Tine Harrow for ATV & Garden Tractors

A Valuable Benefit of the Country Harrow is it's Simple Depth Control Feature that lets You Accomplish a Variety of Tasks.
Within just a few minutes the harrow can be adjusted to be pulled in the aggressive, less aggressive or inverted mode, or a combination of those modes.
Through a system of attaching hooks, the individual component can be towed from the front or rear hooks, for instance, in the most aggressive position, ground contact will make the tine stand upright. However, when the drawbar is placed at the opposite end, ground contact will then make the tines less aggressive. To achieve a combination mode, e.g. Fluff with the front component and firm with the rear component, you need only to unhook the rear most component and reverse its direction of travel or perhaps turn upside down to Firm and Smooth.

L4 Model (4' wide x 7 1/2' long) 137 LBS $495.00 Add To Cart

Call 1-800-335-1880 for shipping questions. Free Shipping to a business address.

 

 RC-4 Rotary Harrow for ATV and Garden Tractors

The Spidertm is an innovative self-driven rotary harrow. The uses for this harrow range from renovating arenas and driveways to conditioning any sand, soil or gravel surface. The Spidertm has 2 ft. diameter rotors that are self-driven as a result of being set at a 5 degree angle. No power take-off is required. The small rotors are an advantage in two different ways over larger diameter rotors. First, the units extend only about 3 ft. behind the tractor for better maneuverability, and second, the small diameter forces them to spin at a higher RPM which disburses more material. Rotors are preset at opposing angles to provide straight pulling and smoother operation. Wheels provide transport by simply inverting the unit. Integrated platform for 8" blocks provide the necessary down force

4 ft. SPIDER™ Rotary Conditioner RC-4 Weight-95 lbs.

$550.00 Add To Cart

This item can ship to your residence FREE!

Wagons and Trailers

 The Heavy Duty Single Axle ATV & Garden
Trailer That's Economical & Versatile

Model 5400 $699.00 Add To Cart
Model 5400LW (Less Wood)
$659.00 Add To Cart

Sale Special! Model 5400- $529.00 + Shipping! Call us for a shipping quote!

Model 5400LW-$489.00 + Shipping

Call Toll Free: 1-800-335-1880

• 5 ft bed length
• Approximate weight 150 lbs.
• Capacity - approximately 1200 lbs.
• Standard model includes 5 ft. by 38 inch wide bed with 12 inch high removable side racks.
• Model 5400 LW (less wood) is also available at a further savings.
• Unique corner braces are included on all four corners to allow individual side board removal or complete conversion to a flatbed trailer.
• Spring loaded positive lock allows single action flip up dumping for quick emptying.
• 16 x 6.5-8 high flotation tires (16 inch O.D.).
• 2 x 2 inch square tubing tongue material and heavy plate steel axle support.
• Treated Lumber bed and side boards.

 

 

 1 Ton ATV Versatility Wagon

Wagon Specifications • 16 x 6.5-8 high flotation tires (16 inch OD.)
• 8 inch steel wheels with 3/4 inch sintered steel bearings equipped with grease fittings for long life.
• 3/4 inch high strength axles.
• 3 inch steel cross beams for bed and axle support.
• Heavy structural steel angle front to rear connector.
• 2 inch channel iron tongue for rugged use.
• 1 1/2 x 1/4 inch steering tie rods give maximum stability.
• Approximate weight: 220 lbs.
• Models 6300LW and 7300LW (less wood) are also available
• All beds are of heavy angle iron construction in combination with treated lumber. Removal of all side racks allow easy conversion to a flat bed.

Heavy duty 4-wheel design allows large load handling with ease. Pull it with your ATV, lawn or garden tractor. The one ton capacity makes this wagon versatile! It fits in your barn aisle and is handy around the yard and garden. Haul wood, hay, grain, gravel, sand, manure, mulch, garden products, leaves, yard clean up, etc. The 4 wheel design allows you to leave your load on the wagon while unhitched and to be pulled easily by hand when necessary.

Model 7300 (7 Ft. bed) $929.00 Add To Cart Sale Special- Model 7300- $649.00 + Shipping!

Model 7300LW (Less Wood) $889.00 Add To Cart Model 7300LW- $609.00 + Shipping!


Model 6300 (6 Ft. bed)
$899.00 Add To Cart Model 6300- $609.00 + Shipping!


Model 6300LW (Less Wood)
$859.00 Add To Cart Model 6300LW- $569.00 + Shipping!

Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

 

Click Here for Instruction Manual

 Optional: Hand Operated Bolt On Dump for our 1 ton models.
Model 3010 $120.00 Add To Cart
• Converts standard wagon or trailer into dump bed for quick unloading (1/2 ton dump capacity).
• Variable position dump action allows material disbursement as desired depending upon angle of bed.
• Combination scissor and hydraulic jack arrangement provides bed raising for the hand operated model 3010.

Sale Special- Model 3010 $99.00 + Shipping! Call us for a shipping quote!

 

 

 

 

 

Click Here for Instruction Manual

 1 Ton ATV Tandem Trailer, For Rugged Use!
A great accessory for small or large garden tractors where big loads are expected. The tandem axle design allows the maneuverability of a trailer plus the weight capability of a wagon. • Approximate weight 220 lbs.
• Standard 6 and 7 foot models have 38 inch wide beds and 12 inch high removable racks.
• Models 6500 LW and 7500 LW (less wood) are also available at a savings so that self installation of wood is possible.

Trailer Specifications: • 16 x 6.5-8 high flotation tires (16 inch O.D.)
• 8 inch steel wheels with 3/4 inch sintered steel bearings equipped with grease fittings.
• 3/4 inch high strength axles. 2 x 1 inch channel steel chassis.
• Floating tandem wheel for following rough terrain.
• Heavy 2 inch square material for tongue.

Model 7500 (7 Ft. bed) $929.00 Add To Cart Sale Special- Model 7500- $649.00 + Shipping!

Model 7500LW (Less Wood) $889.00 Add To Cart Model 7500LW- $609.00 + Shipping!


Model 6500 (6 Ft. bed)
$899.00 Add To Cart Model 6500- $609.00 + Shipping!


Model 6500LW (Less Wood)
$859.00 Add To Cart Model 6500LW- $569.00 + Shipping!

Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

Manure Spreader

 

 

 

 

 

 

 

 

 

 

 

 

 

The small farmer's spreader
to pull behind a garden tractor or ATV.

Click Here for Operator's Manual

Estate "Mighty" Spreader
25 Bushel Manure Spreader
Model 600

This 25 bushel manure spreader performs just like the large farm models! It's great for horsemen, homesteaders, and hobby farmers who have manure to dispose of. The unit is ground driven and needs no power take off or any external engines. Any 10 HP or larger tractor or ATV can pull the "mighty" spreader with ease. The unit being only 46 inches wide also allows for extra maneuverability and versatility. Pull the unit right down your barn aisle to load. The rugged construction will handle all kinds of manure, including that mixed with hay and straw.
Features • Ground wheel driven - #55 link chain for reliability.
• No differential required. Drag chain ratchet driven by one wheel while rear beater is driven by opposite wheel.
• All structural members are hot rolled steel enclosing the treated lumber.
• High strength steel gears in conjunction with cast iron sprockets and link chain provide extra strength where needed.
• Standard V belt and pulleys provide final drive speed for the beater.
• Outside wheel width is 46 inches to provide maneuverability
• 6ft long x 2.5ft wide x 1.5ft high load bed allows for big loads.
• High flotation 16 OD tires provide traction.
• Approximate weight 250lbs

$1490.00 Add To Cart

Sale Special- Model 600- $1059 + Shipping! Call us for a shipping quote!

Call Toll Free: 1-800-335-1880

ATV Log Skidder

 

ATV Log Skidder Model LS48: $529.00 with FREE SHIPPING!

This ATV Log Skidder has all the features you expect from a CMI product. Heavy Duty Construction insures years of use. High flotation ATV tires with roller bearings and external grease fittings for easy maintenance and long life. The frame is specifically designed to protect the tires from the impact of trees and other obstacles when hauling logs on the trail. Heavy welded slider ring attaches to your chain, cable or lifting strap. Simply wrap around the log, attach to the slider ring and pull forward. The forward motion lifts the front of the log up the arch rail and makes it easy to pull. Arch width opening is 23 inches wide. Comes with a standard pin style hitch, or for added convenience add our 2" ball hitch adapter for quick hookup to your ATV.

Add To Cart or call us toll free at 1-800-335-1880 for more information about this ATV Log Skidder.

Call Toll Free: 1-800-335-1880